In PET sheet/film production, we prefer straightforward and efficient operations. The traditional pre-drying procedure has been completely removed from the entire process. Whatever the combination, 100% PET pellets or flakes or virgin, or a mixture of them, our systems can easily handle it.
1- The production of high quality PET flakes using 100% bottle flakes.
2- The GSmach system is characterised by a decontamination/dehumidification process (about one hour's time) that completely extracts the volatile components still present in the bottle flakes, resulting in a flake quality superior to any non-dry co-transfer system.
3- Production of perfect, non-fragile flakes that do not face any drop in IV (Intrinsic Viscosity) during production, with no restrictions on thickness. Tested with a sheet thickness of 1.5 mm.
4- Possibility to reduce the thickness of thermoformed articles.
5- There is no limit to the amount of recycled material generated during the thermoforming process. The zero drop in viscosity makes it possible to reprocess the thermoformed backbone of the PET sheet produced on the sheet extruder line, creating an endless production process starting from the first sheet produced on the machine.
6- Effective energy saving technology with very low energy consumption.
Feeder → transit bin → loss-in-weight feeding → twin-screw mixing → filter → gear pump → distributor → T-die → three-roll calendar → cooling stack and trimming → thickness tester → corona treatment → silicon/antistatic coating and drier → protective film coating → traction → automatic winder with accumulator
WeChat : +86 15312989585
Whatsapp : +86 15312989585
Email : sales1@njgsmach.com
IPv6 network supported
